Parker 930114 Filter Element

Description

Parker 930114 Filter Element – 40CN Series Medium Pressure Filter, Nitrile Seal & 10C Cellulose Media

## Product Basic Information
– **Model**: 930114
– **Product Series**: Parker CN Series Replacement Filter Elements
– **Compatible Housing**: 40CN Filter Housing
– **Length Specification**: Length 2 (Long Size)
– **Filter Element Type**: 10C Cellulose (High-Adsorption Cellulose Media Conventional Filter Cartridge)
– **Sealing Material**: Nitrile
– **Micron Rating**: 10 µm

## Core Product Advantages

### 1. Genuine 10C Cellulose High-Adsorption Media + Long-Size Design, Balancing Fine Filtration & Long-Term Dirt-Holding
As an authentic filter element from Parker’s Hydraulic & Industrial Process Filtration Division EMEA, the 930114 integrates 10C cellulose high-adsorption media with the Length 2 long-size specification. It delivers core performance of “fine impurity adsorption & interception + high dirt-holding long-term operation” for the 40CN filter housing. Its 10 µm filtration accuracy efficiently captures harmful impurities of 10 µm and above in hydraulic oil, while the porous structure of the cellulose media deeply adsorbs tiny colloids (e.g., 5-8 µm colloidal particles from hydraulic oil oxidation), low-viscosity contaminants (e.g., 2-5 µm oil-based impurities from equipment leakage), and some organic residues. This prevents “adsorption-induced blockage” and “seal adhesion” to hydraulic components such as directional valves and hydraulic cylinder seals.

The long-size design increases the media’s effective filtration area by 60% compared to the Length 1 short size, with adsorption capacity significantly enhanced (90% higher than ordinary short-size cellulose filters). It meets long-term filtration needs in medium-flow working conditions, solving the pain point of “adsorption-type filters having low dirt-holding capacity and requiring frequent replacement”—achieving a dual breakthrough in “dual protection (adsorption + filtration)” and “long-term operation & maintenance”.

### 2. 10 µm Fine Filtration Accuracy, Covering Medium-Flow Medium-Pressure Light-Load Clean Hydraulic Scenarios
A 10 µm micron rating is optimized for medium-flow hydraulic systems that require “balanced fine filtration and circulation efficiency,” and it widely adapts to the medium-pressure working conditions of the 40CN housing:
– In the hydraulic drive circuit of medium-sized food filling equipment, it filters wear particles from transmission components and filling material debris to maintain the positioning accuracy deviation of filling heads at ≤ ±0.05mm, avoiding liquid leakage.
– In the hydraulic control system of medium-sized rubber vulcanizing machines, it intercepts rubber impurities and oxidized particles generated by heating to maintain the mold clamping accuracy of vulcanizing dies (deviation ≤ ±0.03mm), improving the molding consistency of rubber products.
– In the hydraulic paper-adjusting circuit of printing and packaging production lines, it filters paper fiber impurities and guide rail wear particles to ensure the conveyor belt’s speed fluctuation is ≤ ±3%, reducing printing misalignment.

Compared to 5 µm filter elements, the 930114 reduces oil flow resistance by 45% and accommodates a flow range of 0-600 L/min (matching the 40CN housing’s flow requirements), eliminating unnecessary system power loss. Compared to 20 µm filter elements, its filtration efficiency is enhanced by 50%, stabilizing oil cleanliness at NAS Class 8 and meeting ISO 4413 hydraulic system cleanliness standards. It removes solid impurities through physical interception and purifies oil through cellulose adsorption, making it the “core filter for medium-flow medium-pressure light-load clean hydraulic scenarios”.

### 3. Nitrile Rubber Seal for Conventional Working Conditions, Excellent Cost-Effectiveness
The seal is made of Nitrile (nitrile rubber), which offers excellent mineral oil resistance, good elasticity, and adaptability to conventional temperatures. It maintains a tight seal within a temperature range of -40 to 100°C (-40 to 212°F) and supports a maximum working pressure of 70 bar (1015 psi), making it fully compatible with various conventional working conditions:
– In food processing equipment and rubber vulcanizing machines operating at room temperature, nitrile rubber seals exhibit stable oil swelling resistance, with a service life of over 1,500 hours.
– In non-extreme environments (e.g., workshop production, mild outdoor operations), it retains good elasticity and zero leakage risk.
– Compared to fluoroelastomer seals, nitrile rubber has lower procurement costs and requires no additional investment for extreme temperature or special oil compatibility. It provides a “reliable protection + economical and practical” sealing solution for medium-flow medium-pressure light-load clean hydraulic systems, especially suitable for food, rubber, and printing industries that are cost-sensitive and operate under conventional working conditions.

### 4. Long-Size Design Compatible with 40CN Housing, No Equipment Modification Needed
The Length 2 long-size specification is precisely engineered to match the interface of the 40CN filter housing. It can be directly installed into the 40CN housing’s standard slot—no equipment pipeline modifications, hydraulic module layout adjustments, or housing replacements are required. This design easily adapts to diverse setups: main circuits of medium-sized clean hydraulic stations, integrated hydraulic units of light-load production lines, and continuous-operation systems with high dirt-holding requirements.

The installation process aligns with that of conventional long-size filters, allowing maintenance staff to perform quick replacements after basic training. Enterprises can upgrade filtration accuracy without incurring extra equipment modification costs. Additionally, the long-size design, combined with the uniform porous structure of 10C cellulose media, ensures even oil distribution inside the filter, eliminating adsorption saturation caused by local impurity accumulation. Its filtration stability is 35% higher than that of ordinary long-size adsorption-type filters, balancing “installation convenience” and “filtration reliability” while reducing maintenance difficulty for light-load clean equipment.

### 5. Controllable Full-Cycle Maintenance Costs, Reducing Medium-Flow Light-Load Equipment Burden
The 930114 reduces maintenance costs for enterprises’ medium-flow medium-pressure light-load clean hydraulic systems through multiple advantages:
– **Fluid Compatibility**: It works with mineral oils, vegetable oils, and some food-grade synthetic oils, eliminating the need to stock separate filters for different oil types and reducing inventory categories and capital occupancy.
– **Multi-Line Adaptability**: Its 10 µm fine precision covers the filtration needs of multiple light-load clean production lines (e.g., food filling lines, rubber vulcanization lines, printing lines), reducing the variety of filters purchased.
– **Extended Replacement Cycles**: The high adsorption capacity of 10C cellulose media combined with the long-size design extends the replacement cycle by 50% compared to short-size filters of the same precision. This reduces 4-5 annual maintenance shutdowns and lowers labor costs and downtime losses of clean equipment (single downtime loss of clean equipment can reach tens of thousands of yuan).
– **Economical Sealing**: The cost-effectiveness of nitrile rubber further controls the overall filter usage cost.

Moreover, its original Parker quality avoids the “component blockage-equipment overhaul” cycle caused by non-genuine filters (e.g., substandard precision, media breakage), cutting maintenance costs for core components like directional valves and hydraulic cylinders (single maintenance cost savings can reach tens of thousands of yuan). It is a “high-value choice” for small-to-medium enterprises’ medium-flow medium-pressure light-load clean systems.

## Application Scenarios & Industries

### Core Application Fields
– **Hydraulic Drive Circuits of Medium-Sized Food Filling Equipment**: Suitable for hydraulic drive systems of medium-sized juice and dairy filling equipment. It filters 10 µm+ wear particles from transmission gears and filling material debris to maintain the positioning accuracy deviation of filling heads at ≤ ±0.05mm, avoiding liquid leakage (leakage rate reduced to below 0.1%), increasing food filling qualification rates to over 99.7%, and reducing raw material loss caused by leakage.
– **Hydraulic Control Systems of Medium-Sized Rubber Vulcanizing Machines**: Used in hydraulic control circuits of medium-sized rubber vulcanizing machines for tire treads and large gaskets. It intercepts 10 µm+ rubber impurities and heated oxidized particles to maintain the mold clamping accuracy deviation of vulcanizing dies at ≤ ±0.03mm, improving the dimensional consistency of rubber products (dimensional fluctuation ≤ ±0.02mm), and reducing surface defects (e.g., bubbles, material shortage) of rubber products caused by impurities.
– **Hydraulic Paper-Adjusting Circuits of Printing & Packaging Production Lines**: Applied in hydraulic paper-adjusting systems of carton and color box printing & packaging production lines. It filters 10 µm+ paper fiber impurities and guide rail wear particles to ensure the conveyor belt’s speed fluctuation is ≤ ±3%, avoiding printing misalignment (misalignment rate reduced to below 0.2%), improving the overprint accuracy of printed products (overprint error ≤ ±0.04mm), and lowering the rejection rate.
– **Main Circuits of Medium-Sized Clean Hydraulic Stations**: As a supporting filter for the 40CN housing, it provides filtration for main oil circuits of medium-sized clean hydraulic stations in industries such as food processing and rubber manufacturing. It maintains oil cleanliness at NAS Class 8, prevents cross-contamination between multiple devices, and extends hydraulic system failure intervals to over 7,000 hours, reducing overall maintenance frequency.
– **Light-Load Hydraulic Units for Continuous Operation**: Adapted to light-load hydraulic units of equipment requiring 24/7 continuous operation (e.g., medium-sized agricultural irrigation equipment, automated testing production lines). The long-size high dirt-holding design reduces shutdown and replacement times, while 10 µm fine filtration + adsorption dual protection ensures stable equipment operation, meeting the “high production capacity, low failure” needs of light-load industries (overall equipment efficiency increased by over 12%).

### Covered Industries
– **Food Processing (Filling Sector)**: Medium-sized juice and dairy filling equipment—adapting to medium-flow medium-pressure light-load clean hydraulic needs, ensuring no impurity contamination during filling, and complying with food industry hygiene standards (e.g., FDA, GB 4806).
– **Rubber & Plastic Products**: Medium-sized vulcanizing machines, plastic sheet production equipment—intercepting rubber/plastic impurities, improving product molding quality, and meeting the precision manufacturing requirements of the rubber and plastic industry.
– **Printing & Packaging**: Carton and color box printing production lines—filtering paper fibers and mechanical impurities, ensuring printing overprint accuracy, and reducing printing rejection rates.
– **Agricultural Machinery (Light-Load Sector)**: Medium-sized irrigation equipment, combined seeders—adapting to outdoor non-extreme environments, filtering sediment and component wear particles, and ensuring reliable operation of hydraulic systems.
– **General Industry (Light-Load Clean Sector)**: Automated testing production lines, laboratory medium-sized hydraulic equipment—adapting to medium-flow and cleanliness requirements, ensuring equipment accuracy and operational stability.

## Product Technical Parameters
– **Model**: 930114
– **Product Series**: Replacement Elements – CN Series
– **Filter Type**: Medium Pressure Inline Filter
– **Compatible Housing**: 40CN Filter Housing
– **Length**: Length 2
– **Filter Element Type**: 10C Cellulose (Conventional Filter Cartridge with Cellulose Media)
– **Sealing Material**: Nitrile
– **Micron Rating**: 10 µm
– **Maximum Working Pressure**: 70 bar (1015 psi)
– **Operating Temperature Range**: -40 to 100°C (-40 to 212°F)
– **Suitable Fluids**: Mineral oils, vegetable oils, and some synthetic oils (including food-grade hydraulic oil)
– **Adaptable Flow Rate Range**: 0 to 600 L/min (matching flow requirements of 40CN housing)
– **Core Features**: 10C cellulose high-adsorption filtration media, 10 µm fine protection precision, nitrile rubber seal for conventional conditions, long-size high dirt-holding design