Parker 932664Q Filter Element

Description

Parker 932664Q Filter Element – 80CN Series Medium Pressure Filter, Nitrile Seal & 10Q Microglass Media

## Product Basic Information
– **Model**: 932664Q
– **Product Series**: Parker CN Series Replacement Filter Elements
– **Compatible Housing**: 80CN Filter Housing
– **Length Specification**: Length 2 (Long Size)
– **Filter Element Type**: 10Q Microglass (High-performance Glass Fiber Media Conventional Filter Cartridge)
– **Sealing Material**: Nitrile
– **Micron Rating**: 10 µm

## Core Product Advantages

### 1. Genuine 10Q Microglass High-performance Media + Long-Size Design, Balancing Heavy-Load Filtration & Long-Term Dirt-Holding
As an authentic filter element from Parker’s Hydraulic & Industrial Process Filtration Division EMEA, the 932664Q integrates 10Q Microglass high-performance glass fiber media with the Length 2 long-size specification. It delivers core performance of “deep interception of heavy-load impurities + high dirt-holding long-term operation” for the 80CN filter housing. Its 10 µm filtration accuracy efficiently captures harmful impurities of 10 µm and above in hydraulic oil—including 10-15 µm metal debris from gear wear in construction machinery hydraulic motors, 12-18 µm rust slag from corrosion on hydraulic tank inner walls, and 10-12 µm sand particles infiltrating outdoor-operated equipment. This prevents “impact scratches” and “premature seal failure” to key hydraulic components such as directional valves and cylinder pistons.

The long-size design increases the media’s effective filtration area by 60% compared to the Length 1 short size, with dirt-holding capacity significantly enhanced (80% higher than ordinary short-size heavy-load filters). It meets long-term filtration needs in high-impurity-load working conditions, solving the pain point of “heavy-load filters clogging easily and requiring frequent replacement”—achieving a dual breakthrough in “heavy-load protection” and “long-term operation & maintenance”.

### 2. 10 µm Heavy-Load Filtration Accuracy, Covering High-Flow Medium-Pressure General Heavy-Load Hydraulic Scenarios
A 10 µm micron rating is optimized for high-flow hydraulic systems that require “balanced protection strength and circulation efficiency,” and it widely adapts to the medium-pressure working conditions of the 80CN housing:
– In the hydraulic lifting circuit of 3-5 ton loaders, it filters sand and gear pump wear debris to ensure the bucket lifting speed deviation is ≤ ±5%, avoiding lifting jams that affect operation efficiency.
– In the hydraulic drive system of metal sheet stamping machines, it intercepts metal chips and guide rail wear particles to maintain the mold clamping accuracy of stamping dies (deviation ≤ ±0.1mm), reducing workpiece scrap.
– In the hydraulic suspension circuit of 50-100 HP agricultural tractors, it filters field sediment and bearing wear impurities to ensure precise adjustment of implement suspension height (response time ≤ 0.5 seconds), improving the continuity of farm work.

Compared to 5 µm filter elements, the 932664Q reduces oil flow resistance by 50% and accommodates a high flow range of 0-600 L/min (matching the 80CN housing’s flow requirements), eliminating unnecessary system power loss. Compared to 20 µm filter elements, its filtration efficiency is enhanced by 45%, stabilizing oil cleanliness at NAS Class 8 and meeting ISO 4413 hydraulic system cleanliness standards. It effectively resists damage from heavy-load impurities while ensuring efficient oil circulation, making it the “primary filter for high-flow medium-pressure general heavy-load hydraulic scenarios”.

### 3. Nitrile Rubber Seal for Conventional Conditions, Outstanding Cost-Effectiveness
The seal is made of Nitrile (nitrile rubber), which offers excellent mineral oil resistance and elasticity. It maintains a tight seal within a temperature range of -40 to 100°C (-40 to 212°F) and supports a maximum working pressure of 70 bar (1015 psi), making it fully compatible with most conventional heavy-load equipment working conditions:
– In loaders and stamping machines using mineral oil, nitrile rubber seals exhibit stable oil swelling resistance, with a service life of over 1,500 hours.
– In normal-temperature workshops or outdoor non-extreme environments (e.g., spring/autumn construction work, farmland cultivation), it retains good elasticity and zero leakage risk.
– Compared to fluoroelastomer seals, nitrile rubber has lower procurement costs and requires no additional investment for extreme temperature or special oil compatibility. It provides a “reliable protection + economical and practical” sealing solution for high-flow medium-pressure heavy-load systems, especially suitable for small-to-medium enterprises with controlled budgets and general heavy-load equipment.

### 4. Long-Size Design Compatible with 80CN Housing, No Equipment Modification Needed
The Length 2 long-size specification is precisely engineered to match the interface of the 80CN filter housing. It can be directly installed into the 80CN housing’s standard slot—no equipment pipeline modifications, hydraulic module layout adjustments, or housing replacements are required. This design easily adapts to diverse setups: main circuits of large hydraulic stations, integrated hydraulic units of industrial equipment, and continuous-operation systems with high dirt-holding requirements.

The installation process aligns with that of conventional long-size filters, allowing maintenance staff to perform quick replacements after basic training. Enterprises can upgrade filtration accuracy without incurring extra equipment modification costs. Additionally, the long-size design, combined with the uniform fiber distribution of 10Q Microglass media, ensures even oil distribution inside the filter, eliminating filtration dead zones caused by local impurity accumulation. Its filtration stability is 30% higher than that of ordinary long-size filters, balancing “installation convenience” and “filtration reliability” while reducing heavy-load equipment maintenance difficulty and downtime costs.

### 5. Controllable Full-Cycle Maintenance Costs, Reducing Heavy-Load Equipment Burden
The 932664Q reduces maintenance costs for enterprises’ high-flow medium-pressure heavy-load hydraulic systems through multiple advantages:
– **Fluid Compatibility**: It works with mineral oils, vegetable oils, and some synthetic oils, eliminating the need to stock separate filters for different oil types and reducing inventory categories and capital occupancy.
– **Multi-Equipment Adaptability**: Its 10 µm heavy-load precision covers the filtration needs of multiple general heavy-load devices (e.g., loaders, stamping machines, tractors), reducing the variety of filters purchased.
– **Extended Replacement Cycles**: The high dirt-holding capacity of 10Q Microglass media (80% higher than ordinary glass fiber media) combined with the long-size design extends the replacement cycle by 40% compared to short-size filters of the same precision. This reduces 3-4 annual maintenance shutdowns and lowers labor costs and equipment downtime losses (single downtime loss of heavy-load equipment can reach thousands of yuan).
– **Economical Sealing**: The cost-effectiveness and conventional-condition adaptability of nitrile rubber further control the overall filter usage cost.

Moreover, its original Parker quality avoids the “hydraulic component wear-equipment overhaul” cycle caused by non-genuine filters (e.g., substandard precision, media breakage), cutting maintenance costs for core components like directional valves and hydraulic motors (single maintenance cost savings can reach tens of thousands of yuan). It is a “cost-effective choice” for small-to-medium enterprises’ high-flow medium-pressure general heavy-load systems.

## Application Scenarios & Industries

### Core Application Fields
– **Hydraulic Lifting Circuits of 3-5 Ton Loaders**: Suitable for hydraulic lifting systems of small-to-medium loaders. It filters 10 µm+ outdoor sand and gear pump wear debris to ensure the bucket lifting speed deviation is ≤ ±5%, avoiding lifting jams, boosting on-site work efficiency by over 15%, and reducing shutdowns caused by hydraulic failures.
– **Hydraulic Drive Systems of Metal Sheet Stamping Machines**: Used in hydraulic drive circuits of 100-300 ton metal sheet stamping machines. It intercepts 10 µm+ metal chips and guide rail wear particles to maintain the mold clamping accuracy deviation of stamping dies at ≤ ±0.1mm, reducing workpiece dimension over-tolerance, increasing stamping qualification rates to over 99.2%, and lowering product scrap costs.
– **Hydraulic Suspension Circuits of 50-100 HP Tractors**: Applied in hydraulic suspension systems of agricultural tractors. It filters 10 µm+ field sediment and suspension device bearing wear particles to ensure the response time for implement suspension height adjustment is ≤ 0.5 seconds, avoiding farm work interruptions caused by suspension jams, and increasing daily work area by over 10%.
– **Main Circuits of Large Hydraulic Stations**: As a supporting filter for the 80CN housing, it provides filtration for main oil circuits of large hydraulic stations (e.g., hydraulic stations for construction machinery clusters). It maintains oil cleanliness at NAS Class 8, prevents cross-contamination between multiple devices, and extends hydraulic system failure intervals to over 5,000 hours, reducing overall maintenance frequency.
– **Heavy-Load Hydraulic Units for Continuous Operation**: Adapted to hydraulic units of heavy-load equipment requiring 24/7 continuous operation (e.g., small mining conveyors, small port handling machinery). The long-size high dirt-holding design reduces shutdown and replacement times, while 10 µm heavy-load filtration ensures stable equipment operation, meeting the needs of high-intensity work (daily operation hours increased by over 2 hours).

### Covered Industries
– **Construction Machinery**: Small-to-medium loaders, excavators, road rollers—adapts to outdoor high-pollution heavy-load conditions, filters sand and wear impurities, and ensures stable hydraulic system operation, reducing故障 repairs.
– **Metal Processing**: Metal sheet stamping machines, shearing machines—intercepts metal chips and oxide scale, protects hydraulic drive components, and improves processing accuracy and product qualification rates.
– **Agricultural Machinery**: Tractors, combine harvesters—adapts to field sediment environments, filters impurities, and ensures smooth operation of hydraulic suspension and working devices, improving agricultural production efficiency.
– **General Industry**: Large hydraulic stations, small mining conveyors—balances heavy-load filtration and cost, reduces equipment operation and maintenance expenses, and improves production continuity.
– **Port Logistics**: Small handling machinery, freight forklifts—adapts to high-intensity continuous operations, ensures reliable hydraulic system operation, and reduces the risk of logistics and transportation interruptions.

## Product Technical Parameters
– **Model**: 932664Q
– **Product Series**: Replacement Elements – CN Series
– **Filter Type**: Medium Pressure Inline Filter
– **Compatible Housing**: 80CN Filter Housing
– **Length**: Length 2
– **Filter Element Type**: 10Q Microglass (Conventional Filter Cartridge with Glass Fiber Media)
– **Sealing Material**: Nitrile
– **Micron Rating**: 10 µm
– **Maximum Working Pressure**: 70 bar (1015 psi)
– **Operating Temperature Range**: -40 to 100°C (-40 to 212°F)
– **Suitable Fluids**: Mineral oils, vegetable oils, and some synthetic oils
– **Adaptable Flow Rate Range**: 0 to 600 L/min (matching flow requirements of 80CN housing)
– **Core Features**: 10Q Microglass heavy-load filtration media, 10 µm efficient protection precision, nitrile rubber seal for conventional conditions, long-size high dirt-holding design