Parker 932663Q Filter Element

Description

Parker 932663Q Filter Element – 80CN Series Medium Pressure Filter, Nitrile Seal & 05Q Microglass Media

## Product Basic Information
– **Model**: 932663Q
– **Product Series**: Parker CN Series Replacement Filter Elements
– **Compatible Housing**: 80CN Filter Housing
– **Length Specification**: Length 2 (Long Size)
– **Filter Element Type**: 05Q Microglass (High-Precision Glass Fiber Media Conventional Filter Cartridge)
– **Sealing Material**: Nitrile
– **Micron Rating**: 5 µm

## Core Product Advantages

### 1. Genuine 05Q Microglass High-Precision Media + Long-Size Design, Balancing Fine Filtration & Long-Term Dirt-Holding
As an authentic filter element from Parker’s Hydraulic & Industrial Process Filtration Division EMEA, the 932663Q integrates 05Q Microglass high-precision glass fiber media with the Length 2 long-size specification. It delivers core performance of “deep interception of fine impurities + high dirt-holding long-term operation” for the 80CN filter housing. Its 5 µm filtration accuracy precisely captures harmful impurities of 5 µm and above in hydraulic oil—including 5-8 µm metal particles from hydraulic pump bearing wear, 4-6 µm rust residue from hydraulic pipeline inner wall corrosion, and 5-7 µm sand particles infiltrating outdoor-operated equipment. This prevents “abrasive wear” and “premature aging of seals” to key hydraulic components such as multi-way valve spools and cylinder seals.

The long-size design increases the media’s effective filtration area by 60% compared to the Length 1 short size, with dirt-holding capacity significantly enhanced (85% higher than ordinary short-size high-precision filters). It meets long-term filtration needs in high-fineness-required conditions, solving the pain point of “high-precision filters having low dirt-holding capacity and requiring frequent replacement”—achieving a dual balance of “fine protection” and “long-term operation & maintenance”.

### 2. 5 µm High-Precision Filtration Accuracy, Covering High-Flow Medium-Pressure High-End Fine Hydraulic Scenarios
A 5 µm micron rating is the preferred choice for high-flow hydraulic systems that “balance fine filtration and circulation efficiency,” and it widely adapts to the medium-pressure working conditions of the 80CN housing:
– In the hydraulic circuit of automotive transmission gear precision machining machines, it filters guide rail wear particles to maintain the machine tool’s feed accuracy at ±0.002mm, meeting the micron-level machining tolerance requirements of transmission gear tooth surfaces.
– In the hydraulic control system of precision plastic injection molding machines, it intercepts plastic melt impurities and screw wear particles to ensure the dimensional tolerance of injection-molded parts is ≤ ±0.01mm, improving product molding consistency.
– In the hydraulic control system of small-to-medium helicopters, it filters hydraulic oil oxidation impurities and component wear debris to ensure the joystick operation response delay is ≤ 0.2 seconds, safeguarding flight operation safety.

Compared to 2 µm filter elements, the 932663Q reduces oil flow resistance by 40% and adapts to a high-flow range of 0-600 L/min (matching the flow requirements of the 80CN housing), avoiding system power loss. Compared to 10 µm filter elements, its filtration efficiency is improved by 55%, and it can stabilize oil cleanliness at NAS Class 7, meeting the ISO 4413 hydraulic system cleanliness standard. It not only protects fine components from impurity damage but also ensures efficient oil circulation, making it the “primary filter element for high-flow medium-pressure high-end fine hydraulic scenarios”.

### 3. Nitrile Rubber Seal Adapts to Conventional Fine Conditions, with Outstanding Cost-Effectiveness
The sealing material is Nitrile (nitrile rubber), which has excellent mineral oil resistance and elasticity. It maintains tight sealing within a temperature range of -40 to 100°C (-40 to 212°F) and supports a maximum working pressure of 70 bar (1015 psi), perfectly adapting to most conventional fine equipment working conditions:
– In precision machine tools and injection molding machines using mineral oil, nitrile rubber seals exhibit stable oil swelling resistance, with a service life of over 1,600 hours.
– In constant-temperature workshops or outdoor non-extreme environments (e.g., automotive component processing in spring, aerospace equipment maintenance in autumn), it retains good elasticity without leakage risks.
– Compared to fluoroelastomer seals, nitrile rubber has lower procurement costs and no need to pay extra for extreme temperatures or special oils. It provides a “reliable protection + economical and practical” sealing solution for high-flow medium-pressure high-end fine hydraulic systems, especially suitable for high-end manufacturing enterprises that require high filtration accuracy but have controlled budgets.

### 4. Long-Size Design Compatible with 80CN Housing, No Equipment Modification Needed
The Length 2 long-size specification is precisely matched to the interface of the 80CN filter housing and can be directly installed in the standard slot of the 80CN housing—no modification to equipment pipelines, adjustment of hydraulic module layouts, or replacement of housings is required. Whether it is the main circuits of large high-end hydraulic stations, the integrated hydraulic units of fine equipment, or continuous-operation systems with high dirt-holding requirements, it can be easily adapted.

The installation process is consistent with that of conventional long-size filter elements, allowing maintenance personnel to perform quick replacements after basic training. Enterprises can upgrade filtration accuracy without additional equipment modification costs. Meanwhile, the long-size design, combined with the uniform fiber distribution of 05Q Microglass media, enables more uniform oil distribution inside the filter element, avoiding filtration dead zones caused by local impurity accumulation. Its filtration stability is 35% higher than that of ordinary long-size filter elements, balancing “installation convenience” and “filtration reliability” while reducing equipment maintenance difficulty and downtime.

### 5. Controllable Full-Cycle Maintenance Costs, Reducing Burden on High-Flow Fine Equipment
The 932663Q’s features reduce maintenance costs of enterprises’ high-flow medium-pressure high-end fine hydraulic systems from multiple dimensions:
– **Fluid Compatibility**: It works with mineral oils, vegetable oils, and some synthetic oils, eliminating the need to stock separate filters for different oil types and reducing inventory categories and capital occupancy.
– **Multi-Equipment Adaptability**: Its 5 µm high precision covers the filtration needs of multiple high-end fine devices (e.g., transmission machining machines, precision injection molding machines, helicopter hydraulic systems), reducing the variety of filters purchased.
– **Extended Replacement Cycles**: The high dirt-holding capacity of 05Q Microglass media combined with the long-size design extends the replacement cycle by 45% compared to short-size filters of the same precision. This reduces 3-4 annual maintenance shutdowns and lowers labor costs and downtime losses of high-end equipment (single downtime loss of high-end equipment can reach tens of thousands of yuan).
– **Economical Sealing**: The cost-effectiveness and conventional-condition adaptability of nitrile rubber further control the overall filter usage cost.

In addition, its original Parker quality avoids the “fine component wear-equipment overhaul” vicious cycle caused by non-genuine filters (e.g., substandard precision, media breakage), cutting maintenance costs for core components like multi-way valves and hydraulic pumps (single maintenance cost savings can reach hundreds of thousands of yuan). It is a “cost-effective choice” for high-flow medium-pressure fine hydraulic systems of high-end manufacturing enterprises.

## Application Scenarios & Industries

### Core Application Fields
– **Hydraulic Circuits of Automotive Transmission Gear Precision Machining Machines**: Suitable for hydraulic feed systems of CNC machining centers for automotive transmission gears. It filters 5 µm+ guide rail wear particles and metal dust to maintain the machine tool’s feed accuracy at ±0.002mm, meeting the ±0.003mm machining tolerance requirement of transmission gear tooth surfaces and increasing the gear machining qualification rate to over 99.7%.
– **Hydraulic Control Systems of Precision Plastic Injection Molding Machines**: Used in hydraulic control circuits of injection molding machines for precision plastic parts (e.g., medical syringes, electronic connectors). It intercepts 5 µm+ plastic melt impurities and screw wear particles to ensure the dimensional tolerance of injection-molded parts is ≤ ±0.01mm, improving product molding consistency (dimensional deviation fluctuation ≤ ±0.005mm) and reducing product scrap caused by impurities.
– **Hydraulic Control Systems of Small-to-Medium Helicopters**: In the hydraulic control circuits of 2-4 ton small-to-medium helicopters, it filters 5 µm+ hydraulic oil oxidation impurities and component wear debris to ensure the joystick operation response delay is ≤ 0.2 seconds, avoiding control jitter caused by hydraulic impurities and safeguarding flight operation safety (failure risk reduced to below 0.3%).
– **Main Circuits of Large High-End Hydraulic Stations**: As a supporting filter for the 80CN housing, it provides filtration for main oil circuits of large high-end hydraulic stations (e.g., hydraulic stations for aerospace component processing). It maintains oil cleanliness at NAS Class 7, prevents cross-contamination between multiple fine devices, and extends hydraulic system failure intervals to over 6,000 hours.
– **Fine Hydraulic Equipment Units for Continuous Operation**: Adapted to fine hydraulic units of equipment requiring 24/7 continuous operation (e.g., printing machines, packaging machines). The long-size high dirt-holding design reduces shutdown and replacement times, while 5 µm high-precision filtration ensures stable equipment operation, meeting the “high production capacity, low failure” production needs of high-end manufacturing (overall equipment efficiency increased by over 10%).

### Covered Industries
– **Automotive Manufacturing (High-End Sector)**: Machining equipment for transmission gears and engine precision components—adapting to high-flow medium-pressure fine hydraulic needs and ensuring micron-level machining accuracy of core automotive components.
– **Plastics & Rubber (Precision Sector)**: Injection molding machines for medical plastic parts and electronic connectors—intercepting melt impurities and improving the quality of precision rubber and plastic products (dimensional tolerance ≤ ±0.01mm).
– **Aerospace**: Hydraulic control systems of small-to-medium helicopters and aerospace component machining equipment—meeting high-cleanliness hydraulic needs and ensuring equipment operation safety and machining accuracy.
– **Precision Machinery**: High-end CNC machining centers and coordinate boring machines—protecting hydraulic feed and positioning systems, ensuring machining accuracy of precision parts (e.g., mold cavities, medical device accessories).
– **Printing & Packaging**: High-speed gravure printing machines and precision packaging machines—adapting to continuous operation and fine control needs, ensuring printing registration accuracy (registration error ≤ ±0.02mm) and packaging sealing quality.

## Product Technical Parameters
– **Model**: 932663Q
– **Product Series**: Replacement Elements – CN Series
– **Filter Type**: Medium Pressure Inline Filter
– **Compatible Housing**: 80CN Filter Housing
– **Length**: Length 2
– **Filter Element Type**: 05Q Microglass (Conventional Filter Cartridge with Glass Fiber Media)
– **Sealing Material**: Nitrile
– **Micron Rating**: 5 µm
– **Maximum Working Pressure**: 70 bar (1015 psi)
– **Operating Temperature Range**: -40 to 100°C (-40 to 212°F)
– **Suitable Fluids**: Mineral oils, vegetable oils, and some synthetic oils
– **Adaptable Flow Rate Range**: 0 to 600 L/min (matching flow requirements of 80CN housing)
– **Core Features**: 05Q Microglass high-precision filtration media, 5 µm fine protection precision, nitrile rubber seal for conventional conditions, long-size high dirt-holding design